48V LED Battery Indicator Tester for Lead-acid Battery
Accuracy: +/- 0.5 percent
Operating Voltage: 48V
Operating Current: 20 mA nominal
Suitable battery: Lead-Acid battery
Operating and Storage Temperature: -20℃ to 85℃
Capacity: 1 Red 2 Yellow 7 Green color LED for indicator
Net Weight: 21g / 0.8oz
The Battery Meter works on Lead-acid Batteries only.
Please connect the right voltage to your battery indicator.Voltage too high or too low will makes the battery indicator damaged or work abnormally.
"C" pin of the meter must be connected with the "+" pole of battery. When it connects with the battery, the meter will display full. After 155 seconds, it will display real battery level segment.
Once battery was fully charged, Meter will cycle through for continuous 6 minutes then stay "full" position.
At a 90% battery discharge, the red and yellow LEDs will alternately flash to indicate a very low voltage capacity is remining.
1 x Battery Indicator
1 x Pack of Accessories
1 x User Manual ( English )
Please contact us to resolve any issues before leaving any neutral or negative feedback. Good Communication will be more appreciated,thanks for your support!
Features & Highlights
- 100% Brand New and High Quality:Material: ABS & Waterproof: IP65 & Temperature Range: -40F to 185F.
- High reliability, low cost and compact size. Suitable for lead-Acid battery.
- Works with 48V Lead-Acid Batteries in Golf Carts, Forklifts, Trucks, RV's, ATV's, UTV's, Scooters, Boats and More.
- Displayed with 10 segment LED bar graph (1 Red, 2 Yellow and 7 Green LEDs),Only 1 LED will be illuminated at a time moving from right to left in sequence as the batteries voltage drops.
- Never let your electric equipment run out of power. This battery indicator is specifically designed for battery powered equipment to monitor the charge status of your batteries.
|Package Weight:||0.1 pounds|
|Package Size:||3.19 x 1.93 x 1.93 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by WeiLiQi , contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: CECOMINOD010896, ean: 0709127318301,
If you need detailed setup information Please ask the sellerFit for Battery Type:12V lead-acid battery. Input current?5-10mA. Input power consumption?200-700mW. Dimension: 64*25mm. Do not use the DC converter?The voltmeter can work normally?The charg...
mpn: MICRO-200, ean: 0889251200083,
Test 12V batteries from 100-2000 CCA. Checks batteries (via CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB). Test multiple battery types,car lead-acid starter battery, including regular flooded, EFB, AGM tablet battery, AGM winding battery, GEL batter...
Parameters: Measuring range: DC 4.5-150V The minimum input: DC 4.5V (if the input is lower than 4.5V, there is incorrect measuring or no display) The maximum input: DC 150V (if the input is higher than 150V, the meter may burn) Allowable tolerance: 1...
By B&K Precision
sku: AQ-IBGG-UFG1, mpn: 601, ean: 0817050060102,
B and K Precision Battery Capacity Analyzer tests Lead Acid Batteries and displays the battery's stored charge capacity as a percentage; it also displays both the loaded and un-loaded battery voltages. The model 601 can also display the internal res...