Lathes - 495

mpn: Sher-7612, ean: 0731882165142,

Sherline 7612 - 55° Carbide Insert for 7610 HolderThis is the replacement carbide insert for the P/N 7610 55° Negative Rake Insert Holder. Though not inexpensive, when you consider you are getting four cutting tools in one and are saving a lot of time in tool sharpening, it is really a pretty good deal.Carbide cutters give good finishes on hard-to-machine materials such as cold rolled steel. They will also work on aluminum, brass or leaded steels, and will last practically forever; however,

mpn: 950-1205, ean: 0647829667849,

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 1.75 lbs.Our Part # ALL-47205. Saves time and labor when changing operations- Drills with carriage by using power feed instead of tail stock.. For use with BXA tool posts 250-200 or 250-222. 10-15'' swing.. Securely holds your #2MT (Morse Taper) tooling Interchangeable with Dorian, Aloris, & Phase II BXA series tool posts. While we guarantee your satisfaction, these especially work best with our

mpn: CQ9332A, ean: 0725264077628,

This is a MT3 Live Center Morse Taper No. 3Morse Taper No. 3. Stabalizes work peice while machining. Overall Length: 5.94''; Outside Diameter: 2.05''. Point Diameter: 1.02''; Point Length: 1.34.

mpn: BT1440-1, ean: 0725264077734,

Designed for medium speed medium load lathe. Precision angular-contact triple ball bearing design. Dust and liquid proof seal for long service life. Shaft is made of alloy steel through heat treatment for high rigidity and durability (Rc 60-62).Morse Taper #3.. Max. rpm: 2,000.. Max work piece load: 1,760 lbs.. Accuracy: 0.000394''..

mpn: Frienda-Angle Template Tool-01, ean: 0710560347162,

Measures both inches and centimeters: The angleizer template tool measures both inches and centimeters and has accurate and clear scale, easy to read, good for precise and accurate angle measurements. 25 cm/ 10 Inch scale for the long side, 12 cm/ 5 inch scale for the short side, suitable for builders, craftsmen, weekend warriors and DIY makers alike. Slid into the shape you want: With movable four corners, you can place the angle measure tool onto lots of your work area by sliding the rulers

ean: 0680664790570,

Welcome to ♤Spbamboo♤ Please check the Size Chart below~✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ ✄ SizeChart(Unit:cm/inch) Size:M      Waist:68-94cm/26.77-37.00''         Inseam:73cm/28.74''     Hip:104cm/40.94'' Length:102cm/40.15''Size:L       Waist:70-100cm/27.56-39.37''       Inseam:74cm/29.13''     Hip:108cm/42.51'' Length:104cm/40.94''Size:XL    Waist:72-103cm/28.36-40.55''       Inseam:75cm/29.52''    

mpn: 4200-039, ean: 0791617731783,

This is an edge finder made in USA by Precision Engineering Corporation (PEC Tools). Size is 1/2'' diameter with .200'' tip and 3 1/8'' long. It is made from precision ground hardened tool steel This tool is useful to accurately locate starting point for all types of machine work and jig boring.Made in USA by Precision Engineering Corporation (PEC Tools).. Size is 1/2'' diameter with .200'' tip and 3 1/8'' long.. It is made from precision ground hardened tool steel. This tool is useful to

mpn: 950-1105, ean: 0647829667719,

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 1.75 lbs.Our Part # ALL-47105. Saves time and labor when changing operations- Drills with carriage by using power feed instead of tail stock.. For use with AXA tool post 250-100 or 250-111. up to 12'' swing.. Securely holds your #2MT (Morse Taper) tooling Interchangeable with Dorian, Aloris, & Phase II AXA series tool posts. While we guarantee your satisfaction, these especially work best with our

mpn: 230-4397, ean: 0635963994532,

5C Round Emergency Collet 1/16'' Nylon Tooling For Lathes & Fixtures CNCOur Part # ALL-41193. Made of nylon. Often used to hold irregular shaped work pieces. 1/16'' pilot hole- can be drilled, machined, or bored. Three dowel pins are supplied for accurate machining Internal and external threaded.

mpn: 75250M-301X, ean: 0647829667986,

Turning and facing tools can be locked together (saving time and labor when changing operations).Our Part # ALL-47308. 1'' Tool bit capacity- more versatile than the standard #1 holder. For use with CXA tool posts 250-300 or 250-333. 13-18'' swing.. Interchangeable with Dorian, Aloris, & Phase II CXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts Precision ground and hardened. Completely sealed for maintenance free operation.

mpn: A1970001,

These knurling tools fit regular toolposts and square toolpost turrets of any lathes including CNC lathes and chuckers. Since knurling pressure is absorbed between the two knurls there is no pressure on the lathe, compound, centers or cross feed screw. Depth of knurling can be pre-set for production work before start of operation. Knurling pattern is clear and sharp. Easily removable pins make it simple to change knurls. Furnished with one set of medium diamond pattern knurls but can be used

mpn: ALL-41280, ean: 0635963995058,

5C Collet Storage Rack Holds 30 5C Collets Wall/Machine MountOur Part # ALL-41280. For easy storage of your 5C collets. This 5C collet storage rack holds 30 5C collets and can be mounted on the wall or machine or set on your work bench or shelf. Baked enamel finish.

mpn: 950-1305, ean: 0647829667955,

Precision ground and hardened. Completely sealed for maintenance free operation. Shipping weight- 4 lbs.Our Part # ALL-47305. Saves time and labor when changing operations- Drills with carriage by using power feed instead of tail stock.. For use with CXA tools posts 250-300 or 250-333. 13-18'' swing.. Securely holds your #3MT (Morse Taper) tooling Interchangeable with Dorian, Aloris, & Phase II CXA series tool posts. While we guarantee your satisfaction, these especially work best with our

mpn: 950-1401, ean: 0647829668006,

Turning and facing tools can be locked together (saving time and labor when changing operations). Shipping weight- 4 lbs.Our Part # ALL-47402. Securely holds 1/2'' - 1'' square tool bits. For use with CA tool posts 250-400 or 250-444. 14-20'' swing.. Interchangeable with Dorian, Aloris, & Phase II CA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts Precision ground and hardened. Completely sealed for maintenance free operation.

mpn: L-01, ean: 1909071669804,

Parameters: Motor Work Voltage:12-24VDC Motor Work Current:3-10A N/G Weight:2.5 / 3Kg Clamping range:0.6-6.5mm Included: 1* Mini Lathe 1* Fixed threads 3* Fixed needles (1.5 2.0 2.5mm) 6* Gravers 1* power adapterNote:Our price is included a power adapter.. Motor Work Voltage:12-24VDC. Motor Work Current:3-10A. Clamping range:0.6-6.5mm. Fixed needles (1.5 2.0 2.5mm).

mpn: 950-1301, ean: 0647829667924,

Turning and facing tools can be locked together (saving time and labor when changing operations). Shipping weight- 2.6 lbs.Our Part # ALL-47302. Securely holds 1/2'' - 3/4'' square tool bits. For use with CXA tool posts 250-300 or 250-333. 13-18'' swing.. Interchangeable with Dorian, Aloris, & Phase II CXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts Precision ground and hardened. Completely sealed for maintenance free

mpn: 5000M, ean: 0084298500039,

CLC Work Gear 5000M Medium Elastic Back Support Belt------.

mpn: 8305, ean: 0669762004093,

Infinity Chuck Jaw designed to hold medium/large bowls, plates & platters. External dovetail to grip internal bowl recess. Internal dovetail to grip bowl foot. Able to grip round dowels. Capacity overlaps #4 Bowl jaws Larger external dovetail, smaller internal dovetail capacity than traditional JS100N Jaws. Much more robust & able to handle larger work – Up to 45% thicker base, 40% wider face, up to twice dovetail depth of traditional JS100N Jaws Not recommended for Nova Midi or G3 Chuck

mpn: 3901-4910, ean: 0769053090054,

HHIP JT33 to MT2 rotating tailstock chuck adapter this is a ''live'' drill chuck adapter with smooth, sealed bearings in the tailstock. Use it with any JT33 drill chuck to support small diameter work where a live center is not practical. The shank is 2 Morse taper. The drill chuck taper is JT33. Drill chuck is not included.This is a ''live'' drill chuck adapter with smooth, sealed bearings in the tailstock. Use it with any JT33 drill chuck to support small diameter work where a live center is

mpn: 8313, ean: 0669762004147,

The NOVA Infinity Quick Change delivers fast and positive jaw changes which is much faster and less hassle than the screw fastening method with the older NOVA chuck models and other chuck brands. The NOVA Infinity Jaw Key and Infinity Jaws Slides are a precision cast metal amalgam 3 times the tensile strength of machine grade steel. Jaw Key positively taper locks into Jaw slide with an embedded dovetail design. A stronger and more rigid bond than the original NOVA Screw on Jaws. The Infinity